Cabletron Systems Cabletron SmartSwitch Router 250 - Manual (Page 12)

11
5. Click OK.
6. Answer Yes to "Do you want to restart your computer?" Your
computer will reboot.
(Note: If your settings were already configured with these
attributes, you will not be prompted to reboot and a reboot is not
necessary.)
♦ Install Cabletron DSL Tools on your PC
Instructions:
Insert the CD into your CD-ROM drive. If Auto-play is enabled, the
Cabletron Systems Installation CD window will be displayed.
If you do not see the Cabletron Systems Installation CD window,
then follow these steps:
This section assumes that you have already:
✔ connected the cables.
✔ powered the router on.
✔ set your PC to obtain an IP address automatically.
✔ rebooted your PC.