Cabletron Systems Cabletron SmartSwitch Router 250 - Manual (Page 15)

14
After you have started the Quick Start application and have entered your
password, you are ready to enter the following information in the Quick
Start configurator.
♦ Configuration Instructions
1. Network Options
Select either IP Routing, or Bridging, or both.
2. Link Protocol
Select one of the following three protocols (check which protocol
is supported by your Network Provider):
• PPP
If PPP is selected, you will need to enter a User Name and
Password for your Internet connection.
• RFC 1483
If you are using RFC 1483, do not enter a User Name and
Password for your Internet connection.
ROUTER CONFIGURATION