Canon CDI-E144-010 - Manual (Page 113)

111
Various Functions
Various Fun
ctions
1 Install the driver and the software
applications bundled on the
Canon Digital Camera Solution
Disk (first time only).
z Please see the Software Starter Guide for the
installation procedures.
2
Use the supplied interface cable
to connect the computer's USB
port to the camera's DIGITAL
terminal.
USB
port
Interface cable
3 Slide the camera's mode switch
to .
DIGITALTerminal
1. Open the terminal cover
with your finger nail.
2. Hold the USB connector so
the side is up, then
insert it into the DIGITAL
terminal securely.
Always grasp the
connector’s sides to
remove the interface
cable from the
camera’s DIGITAL
terminal.