Canon 1650 - Manual (Page 60)

AXIS 1650 User’s Manual 60
11. Install AXIS CAPT Print Monitor software on your workstation. The software is available on the
AXIS 1650 CD and on www.axis.com. Click your way through the program.
12. During the software setup, you will reach the Set the Unicast Communication Mode screen,
check the Enable unicast check-box.
13. Click Next and Finish to finish the installation.
14. Windows XP/Server 2003:
Go to Start | Printers and Faxes and click the Add a Printer icon to start the Add Printer Wizard.
(Windows XP Home Edition: Start | Control Panel | Printers and Faxes | Add a Printer).
Click Next.
Windows 2000:
Go to
Start | Settings | Printers and click the Add Printer icon to start the Add Printer
Wizard. Click Next.
15. Select Local Printer attached to this computer. Make sure the Automatically detect and
install my Plug and Play printer check box is not checked. Click Next.
It is important that the destination file is specified in capital letters. Otherwise the edits are
temporary and will be lost once the AXIS 1650 has been rebooted.