Installation and integration, Configuration and management, Printing protocol – Canon 1650 User Manual
Page 9
9
AXIS 1650 User’s Manual
Product Overview
Installation and Integration
The installation of the AXIS 1650 and its integration into the network is performed using one of
these software combinations:
•
AXIS IP JumpStarter (for IP setting) and then AXIS CAPT Print Monitor (for printer
installation)
•
Canon
NetSpot Device Installer (for IP setting) and then AXIS CAPT Print Monitor (for
printer installation)
Configuration and Management
Configuration and management of AXIS 1650 is performed using the TCP/IP protocol. The main
method is using a
Standard Web browser, See “Print Server Management from the Embedded
Printing Protocol: TCP/IP
Speed
The AXIS ETRAX chip has been specifically designed for LAN products and benefits users with a
faster throughput than a direct PC-to-printer connection. With a sustained data throughput of
over 1 Mbytes per second (100baseTX) the AXIS 1650 is fast. ECP high-speed communication is
supported.
Security: You can assign a password that restricts unauthorized configuration of the AXIS 1650.
Monitoring: The AXIS 1650 embedded Web pages allow you to continuously monitor printer
status. Additionally, the AXIS 1650 supports SNMP for remote monitoring.
•
AXIS IP JumpStarter and AXIS CAPT Print Monitor are available free of charge from the
AXIS 1650 CD and on www.axis.com.
•
NetSpot Device Installer is available on www.canon.com