Philips MX3297B User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S
ound
M
enü
C
ontrols
(
continued
)
□
SURROUND SOUND
T^y adding optional external
JLJ speakers to the TV*s sound
system, you can create the feeling
of reflected sound that surrounds
you at a movie theater or concert
hall,
[ BEGIN]
Connect both external
speakers to the speaker wire
terminals on the TV.
Recommended speakers: 8ohm, 15
watt minimum. Be sure the (+) and
(-) speaker wires are connected to
the correct R(ight) and L(eft)
speaker terminals on the TV.
<|>
Place the speakers so the
viewing area is between the TV
and the rear surround speakers.
(See overhead view drawing.)
<i>
Turn TV ON and place the
STEREO control to the "STEREO
IF AVAILABLE" (i^) position.
After setup whenever a stereo
signal is received the audio will be
heard in Surround Sound.
I / S
mart
H
elp
Remember, Surround
M Sound will not work with
only one speaker connected; or
with monaural audio material
(unless the Incredible Surround
control is turned ON - see page
24.)
REAR SURROUND SOUND
SPEAKER TERMINALS
BACK OF TV
REAR SURROUND SOUND SPEAKERS
Note: The rear Surround Sound speakers will not
be heard at the same volume level as the front TV
speakers. It is intended for the speakers to give
a background noise effect which requites a lower
volume level than the TV's from speakers.
TV
PRIMARY VIEWING AREA
27