Canon IMAGE FORMULA DR-6010C - Manual (Page 123)

Chapter 7 ISIS/TWAIN Driver Settings
7-28
[Horizontal Offset]
Enter the desired offset from the edge of the document feeder inlet.
☞ When applying an add-on to the front side, enter the offset from the left side of the feeder inlet.
☞ When applying an add-on to the back side, enter the offset from the right side of the feeder inlet.
☞ The entered offset is the distance to the left end of the applied text (or bitmap image.)
[Vertical Offset]
Enter the distance from the top edge of the page.
Print width
Enter the width of the bitmap image to be applied.
☞ The bitmap image will be rotated 90º clockwise and compressed to the specified width before it is
applied.
☞ An error message may appear depending on the size of the image file. If this happens, reduce the
Print width.
First Counter
This is the current setting for the single counter, or for the first counter if double counters are
selected.
☞ Settings can be changed in the First Counter settings dialog box.
Second Counter
This is the current setting for the second counter if double counters are selected.
☞ Settings can be changed in the Second Counter settings dialog box.
First and Second Counter Settings Dialog Boxes
Make settings for add-on counters.