Casio SF-7100SY User Manual

Page 14

Advertising
background image

– 12 –

2. Press ENTER to reset the Digital Diary or ESC to abort.

After pressing ENTER, the message shown below appears to indicate that
RESET is being performed. RESET takes about 10 seconds to complete.

After the reset procedure is complete, the message “SET TIME!” appears.

After about two seconds, the Home Time screen appears.

3. Press FUNCTION, select “Time set”, and then use the procedure on page 20 to

set the Home Time.

If you turn power off without setting the Home Time, the “SET TIME!” message
appears the next time you turn power on. The Digital Diary will not operate
properly until you set the Home Time.

When to press N for “no”

When you are not resetting the unit to clear all data and settings.

When you are not resetting the unit after a data error (page 76).

1. Press N in response to the message that appears on the display when you start

the all-reset operation.

At this time, the message “CHECKING DATA, PLEASE WAIT.” appears. After
the data check procedure is complete, the message “SET TIME!” appears.

After about two seconds, the Home Time screen appears.

2. Press FUNCTION, select “Time set”, and then use the procedure on page 20 to

set the Home Time.

If you turn power off without setting the Home Time, the “SET TIME!” message
appears the next time you turn power on. The Digital Diary will not operate
properly until you set the Home Time.

Following are the initial settings of the unit after you perform the all-reset operation.

Home Time:

New York
JAN 1, 2000 (SAT)
12:00 AM
12-hour format

World Time:

London

Daily Alarm:

12:00 AM

Sound:

Daily alarm — OFF
Key — ON

Messages:

English

Character input: CAPS — ON

Advertising
This manual is related to the following products: