Casio SF-7100SY - Manual (Page 78)

– 76 –
■ Error Messages
Data Error Message
The data error message appears whenever the Digital Diary’s internal check
discovers a problem with data stored in memory.
Appearance of the data error message indicates that you must perform the all-reset
procedure to correct the problem. Start out with the procedure under “To start the all-
reset operation” on page 11, and continue with the procedure under “When to press
Y for “yes”” on page 11.
If you still have trouble after trying the RESET operation, you may have a hardware
problem. If so, consult with your nearest CASIO dealer.
■ Message Table
NOT FOUND!
PRESS ESC TO QUIT.
MEMORY FULL.
PRESS ANY KEY.
MEMORY MANAGE-
MENT CAN INCREASE
MEMORY FOR NEW
STORAGE.
ALARM TIME COINCI-
DENT!
ALARM TIME ALREADY
PASSED!
Change specification
or cancel search.
Try performing
memory manage-
ment to make more
data available. Press
SHIFT FUNCTION
and then select
“Memory manage-
ment.” See page 19.
Set a different alarm
time or change the
existing alarm time.
Set a different alarm
time.
Message Meaning Action
Data specified in search
operation does not exist in
memory.
No more room in memory
for storage of data. You can
increase the amount of
memory available for
storage using Memory
Management.
Attempt to set an alarm that
is already used for another
entry.
Attempt to set an alarm for a
time or date that is already
passed.