Visit our website – Philips G470-30 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Replacing The Mini Shaver Cutter

If the mini shaver cutter is worn or damaged, do
not continue using the appliance. Replace the mini

foil cutter and the shaving foil immediately.

A worn or damaged mini shaver cutter should

only be replaced with an original Philips cutter

Visit www.philips.com/support or call

I -800-243-3050 for assistance.

n Remove the detachable shaving head by

pulling it from the appliance (fig. 26).

B Remove the old mini shaver cutter by pulling

it from the appliance (fig. 32).

B Make sure that the spring within the driving

unit does not get lost.

□ Insert the new mini shaver cutter carefully

into the driving unit (fig. 33).

B When the mini shaver cutter is properly

positioned, push it into its end position with

your finger.

Q Replace the detachable shaving head on the

appliance or place it in the storage stand.

Assistance

For assistance:

Visit our website:

www.philips.com/support or call toll free

1-800-243-3050

Information is available 24 hours a day,

7 days a week.

Battery Removal

I This Philips Norelco Groomer contains a

rechargeable Nickel Metal Hydride battery,

which must be disposed of properly (fig. 34).

I

Battery should only be removed when

Groomer is to be discarded.

I For assistance, visit our website:

www.philips.com/support or call

1-800-243-3050.

D Unplug electrical cord from outlet and

Groomer before dismantling Groomer.

B

Allow the Groomer to run until the batteries

are completely empty/depleted. Turn

Groomer off.

B

Insert a narrow, flat blade screwdriver in the

groove next to the shaft at the top of the

Groomer (fig. 35).

Q Turn the screwdriver to separate the two

housing halves.

B

Lift the battery out of the housing using the

screwdriver (fig. 36).

B

Twist and bend the battery connections until

they break.

B

Remove the battery from the Groomer.

B

Do not attempt to replace battery. Insulate

battery ends by covering with tape and/or
place battery in a small plastic bag. Discard

Groomer.

B Contact your local town or city officials for

battery disposal information or call I -800-

8-BATTERY or www.rbrc.com for drop-off

locations.

Advertising
This manual is related to the following products: