Philips TS2768C - Manual (Page 17)

S etting the R emote to W ork
VCR s
"^^our remote control is set to
J. work your TV and many
infrared remote (IR) control
VCRs. However, an easy one­
time step may be necessary
before the remote will work your
VCR.
Try this initial check to see if
going on to the following section
is necessary.
C begin )
Press the VCR System but­
ton on the remote.
Point remote toward VCR
and press the POWER button.
<l> Does the remote turn the
VCR ON?
IF YES, ® and try the other
VCR buttons on the remote. If
they also work the VCR, then
the remote is ready and no fur­
ther steps are needed.
If NO, continue...
First look up a TWO-DIGIT
f VCR REMOTE VCR REMOTE \
BRAND CODE NO. BRAND CODE NO.
remote code number for your Akai 24, 25, 36 Panasonic 01, 02, 52
brand VCR before going through Capehart 33 Philips 00,05
the simple "1,2,3" steps (on the Conoid 13 Philips Video CD 37
following page).
Curtis Mathes 42 RCA 04, 32, 42, 43, 44 |
continue to next page Daewoo 33 Samsung 22, 30
Emerson 20, 31, 34, 40 Sansui 49
Fisher 06,07 Sanyo 13
\ ' / S mart H fj . p
Goldstar 23 Sears 08
Go Video 45, 46 Sharp 11, 12
Remember, if more than Hitachi 03,51 Shintom 35
i one number is listed, you JVC 14, 47, 48 Sony 09, 10,41
may have to try more than the
Magnavox 00,05 Teknika 26
first two-digit code given in order Matsushita 01,02 Toshiba 18, 19
to locate your VCR's remote code.
Mitsubishi 16, 17, 38, 39, 50 Video Concepts 29
Multitech 27,28 Zenith 15
i
NEC 1 21
17