Connecting avcr or cable/satellite box, Connecting digital audio equipment, Viewing .me] listening to the pl.tyback – Philips MX6050D-17 User Manual
Page 29: Viewing and listening to the playback, Connections (optional)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections (optional)
Connecting aVCR or
Cable/Satellite Box
Connecting digital audio
equipment
Viewing .me] listening to the pl.tyback
O
Connect the VCR or Cable/Satellite Box
to the TV as shown.
© Connect the DVD system’s
AUDIO IN-
AUX
jacks to the AUDIO OUT jacks on
theVCR or cable/satellite box.
Before starting operation, press
AUX
on
the remote to select “RU-'i” in order to
activate the input source.
O Connect the DVD system’s
VIDEO OUT
jack to the VIDEO IN jack on theVCR.
O Connect the DVD system’s
LINE OUT
jacks to the AUDIO IN jacks on theVCR.
This will allow you to make analog stereo
(two channel, right and left) recordings.
To view DVD playback while
recording,
you must connect the DVD
system to your TV using S-VIDEO (as
shown above) or Component
(Pr/Cr Pb/Cb Y) video connection.
Connect the DVD system’s
DIGITAL
OUT-COAXIAL
jack to the DIGITAL
COAXIAL IN jack on a digital recording
device (such as Dolby Digital decoder,
CD recorder.)
Before starting operation, set the
DIGITAL OUTPUT according to the
audio connection. (See page 28 “Setting
the digital output’’.)
Helpful Hints:
- Some
DVDs
are copy-protected. You
cannot record the disc through a VCR or
digital recording device.
- Always refer to the owner's manual of the
other equipment for complete connection
and usage details.
15