Philips MX6050D-17 - Manual (Page 33)

Getting Started
Selecting the color system that
corresponds to your TV
In order for a DVD to play on this DVD
system, the color system of the DVD, the
TV and the DVD player should match.
Before changing the TV system, ensure
that yourTV supports the selected color
system.
O In disc mode, press SYSTEM MENU.
Use the ► A ▼ keys on the remote
to navigate in the menu.
O Highlight icon and press ▼.
Move to [Q and press ►.
Move to {TV SYSTEM} and press ►.
AUTO - Select this if the connected TV
is compatible with both NTSC and PAL
(multi-system.) The output format will be
in accordance with the video signal of the
disc.
NTSC - Select this if the connected TV
has the NTSC system. It will change the
video signal of a PAL disc (VCD only) and
output it to NTSC format.
PAL - Select this if the connected TV has
the PAL system. It will change the video
signal of an NTSC disc and output it to
PAL format.
O Press AV to select a setting and press
OK to confirm.
Follow the instructions show on the
TV to confirm the selection (if any).
-> If a blank/distorted TV screen appears,
wait for 15 seconds for auto recovery.
Setting thcTV shape
Set the aspect ratio of the DVD Player
according to the TV you have connected.
The format you select must be available
on the disc. If it is not, the setting for TV
display will not affect the picture during
playback.
O In disc mode, press SYSTEM MENU.
Use the ► A V keys on the remote
to navigate in the menu.
@ Highlight icon and press ▼.
Move to and press ►.
Move to {TV SHAPE} and press ►.
4:3 PS fPanScanT -
Select this if you have
a conventional TV and
want both sides of the
picture to be trimmed
or formatted to fit yourTV screen.
4:3 LB fletterbox) -
Select this if you have a
conventional TV. in this
case, a wide picture with
black bands on the upper and lower
portions of the TV screen will be
displayed.
16:9 - Select this if
you have a wide­
screen TV.
O Press AT to select a setting and press
OK to confirm.
TIPS:
To return to the previous menu, press -
4
.
To remove the menu, press SYSTEM MENU.
19