Philips 27PT91S - Manual (Page 45)

S
ound
- U
sing the
A
udio
/V
ideo
I
nput
J
acks
(
cont
’
d
)
S - V i D K O I N P I T
J he S(uper)-Video connection
on the rear of the TV can pro­
vide you with better picture detail
and clarity for the playback of
acc&isory sources such as DBS
(digital broadcast satellite), DVD
(digital video discs), video games,
andS-VHS VCR (video cassette
recorder) tapes than the normal
antenna picture connections.
NOTE: The accessory device
must have an S-VIDEO OUT(put)
jack in order for you to complete
the connection on this page.
(BEGIN)
<i> Connect the S-VIDEO
CABLE to the S-VlDEO input
jack on the rear of the television.
Then connect the AUDIO (red
and white) cables to the AUDIO
AV2 jacks on the rear of the TV.
<|> Connect the S-VIDEO
^CABLE to the S-VIDEO output
jack on the accessory device.
Then connect the red and white
AUDIO cables to the AUDIO
(left and right) output jacks on the
rear of the accessory device.
Him the accessory device
I ON.
Press the M. MEDIA button
on the remote control to tune the
AV2 channel. You are now ready
to view the tape or disc on the
TV.
NOTE: Repeatedly pressing the M. MEDIA
button on the remote vWl! toggle the picture
source from the current channel, die
viewed channel, then the AVI (or (JVl) con­
nection, the AV2 connection, and the AV3 con­
nection. Use AV2 for S-Video Connections.
BACK. OF TV
S . M A U i H i ; u >
The S-VIDEO and
B VIDEO AV2 in(puts) are in
parallel. The S-VIDEO input is
dominant when in use. If separate
video signals are connected to the
S-VIDEO and VIDEO AV2
in(puts), the signal from the
VIDEO AVI in(put) will not be
usable.
If you have added AV2 in(puts) to
the TV’s channel memory, just
press the CHANNEL (+) or (-)
button until the AV2 in(puts)
(channel) mode is selected.
© ( T o
O ( T 0 O O
Q / T X O
© (D (D
© © ®
® © ©
© © 0
DBS, DVD, Video Game, etc.
(EQUIPPED WITH S-VIDEO AND
AUDIO OUTPUT JACKS)
NOTE: If you are usuig a
nonstereo device, use only
the Audio Rjack.
1
39