Philips 27PT91S - Manual (Page 49)

R emote C ontrol - U sing C hannel S urf
A list or series of previously
.¿Í viewed channels can be select­
ed with the SURF button on your
remote control. With this feature,
you can easily switch between dif­
ferent TV channels that currently
interest you. The SURF control
allows you to set up to ten channels
in its quick viewing list.
<i> Press the CHANNEL{+) or (-)
button (or the numbered buttons)
to select a channel to add to the
SURF list.
Press the SURF button on the
remote control. The onscreen dis­
play may read, “SURF LIST
EMPTY.” The number of the cur­
rent channel will be shown with
“ADD?” to the right.
While the SURF list message or
the SURF channel list appears on
the screen, press the CURSOR
RING RIGHT to add the present
channel to the SURF list.
1 f you want to delete the present
channel from the SURF list, press
the CURSOR RING RIGHT again.
Repeat steps 1 through 3 to add
more channels (up to 10) to the
SURF list.
A / C H B i n o N
Your remote also has an A/CH
(Alternate Channel) button.
Pressing this button will toggle
between the current and one previ­
ous channel.
© 0 ®
0 0 ©
© 0 0
o o o o
KCMO «K
0
Moves
NOTE; Along with regularly pro­
grammed channels, the external video
source connections can be added to the
SURF list. This means that the AVI,
AV2, and AV3 channels can be added to
your SURF list. Just tune to their chan­
nel and iLse the same procedure
described on this page.
43