Curtis RCD544 - Manual (Page 5)

20. Lightning - For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the product due to lightning and
power-line surges.
21. Safety Check - Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper operation
condition.
22. Overloading - Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fir or electric shock.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
COND ENSATION
If coldwater is poured into a glass, water droplets form on the outside of the glass. This is called
condensation. Condensation may also occur on internal operating parts of the laser pickup.
Condensation occurs:
- When the unit is brought from the outdoors into a warm room, or if it is in a cold room which is heated
quickly.
- In the summer, if the unit is moved suddenly from an air-conditioned room or car to a hot or humid
location.
The unit may not operate property if condensation develops. Should condensation occur, wait for one to two
hours (to allow the internal parts to adjust to the surrounding temperature) before using the unit.
5