Philips MC-320-37 - Manual (Page 19)

Clock/Timer
PHILIPS
Setting the clock
1 In standby, press and hold CLOCK SET / > II.
The clock digits for the hours flash,
2 Press VOLUME -/+ to set the hours,
3 Press CLOCK SET / > II again.
The clock digits for the minutes flash,
4 Press VOLUME -/+ to set the minutes,
5 Press CLOCK SET / > II to confirm the time.
Note:
-
The clock will only be displayed without
backlight in standby.
Setting the timer
The system can be used as an alarm clock,
whereby the CD,TUNER orTAPE is switched on
at a set time,The clock time needs to be set first
before the timer can be used.
You can also use it to record a favourite tuner
programme at a set period (see “Recording
timer")
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically,
!• ■ /,!bv mode, ргеъ. TIMER SET / К on the
■ ' '-rn tor more iiern 2 seconds.
SOURCE to selecl sound soui'ce.
Display sequence shows Hll, i UWCR, IRPE or
ПГГ Tl l^ I
rre l_ ' LJI 'I.
Press TIMER SET / K t o confirm your desired
mode.
4
5
6
7
-♦ Display sequence scrolls 5E and
O flashes. The clock digits for the hours flash.
Press VOLUME -/+ to set the hours.
Press TIMER SET / K again.
The clock digits for the minutes flash.
Press VOLUME -/+ to set the minutes.
Press TIMER SET / Kto confirm the time,
-♦ The timer is now set and activated.
Activating and deactivating
TIMER
In standby or during playback, press
TIMER O N / O F F on the remote control
once.
Display shows O if activated, and disappears
if deactivated.
19