Philips DVD400AT99 - Manual (Page 14)

Warning
Do not set the AUDIO SELECTOR to “AC-3 (ANALOG OFF)” unless you are connecting (to the PCM/AC-3 DIGITAL AUDIO OUT jack) an AV decoder
that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearing as well as the speakers.
Enjoying Dolby Pro Logic Surround Sound Enjoying Two-Channel Digital Stereo Sound
Dolby Pro Logic Surround
You can enjoy Dolby Pro Logic Surround sound by connecting an
amplifier and speaker system (right and left front speakers, a center
speaker, and one or two rear speakers).
■ With an amplifier equipped with Dolby Digital (AC-3),
connect the equipment the same way as described in “Enjoying
Dolby Digital (AC-3) Sound” on the previous page. Refer to that
amplifier’s owner’s manual and set the amplifier so you can enjoy
Dolby Pro Logic Surround sound.
■ With an amplifier not equipped with Dolby Digital (AC-3),
connect the equipment as follows.
Set the AUDIO SELECTOR
to “PCM (ANALOG ON).”
rffl-
AC-3(ANALOGOFF)-l
PCM(ANALOG ON)----
AUDIO SELECTOR
Front
speaker
(left) M \ (J — F r o n t
Center speaker
Rear speaker/
Front
speaker
(right)
Connect one or two
rear speakers.
The sound from the
rear speakers will be
monaural even if you
connect two rear
speakers.
Two-Channel Digital Stereo
You can enjoy Two-Channel Digital Stereo sound by connecting
an amplifier equipped with a digital audio input and speaker
system (right and left front speakers).
Set the AUDIO SELECTOR
to “PCM (ANALOG ON).”
AOSIANALOGOFF)-
PCM (ANALOG ON)—
AUDIO SELECTOR
To VIDEO OUT
Connection
example
Amplifier equipped
with a digital audio
input
To digital
audio input
o
O O
»■» ooooo
Front
speaker
(left)
To video
input ofTV(
Front
speaker
(right)
Notes I---------------------------------------------------------------------------------------------------------------------------------------------------------- -—
' Connect the speakers according to the instructions in the owner’s manual for the speaker system.
■
Refer to the owner’s manual of the connected equipment as well.
' When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any
connections.
' The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the
speakers may be damaged by a sudden high volume sound.
■ Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power on, the speakers may be damaged.
14