No sound /power, Severe radio hum or noise, Poor radio reception – Philips AZ150517 User Manual
Page 12: Nopr indication, Nacd indication, Tpcd indication, The cp skips tracks, Recording does not work, Troubleshooting, Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or sen/ice centre.
WARNING:
Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this wilt
invalidate die warranty.
No sound /power
-
Votume not adjusted
• Adjust the VOLUME
-
Power cord not securely connected
• Connect the AC power cord properly
-
Batteries dead/incorrectly inserted
• Insert (fresh) batteries correctly
-
Headphones connected to the set
• Disconnect headphones
Severe radio hum or noise
-
Electrical interference: set too close to TV. VCR or
computer
*
Move the set to increase the distance
Poor radio reception
-
Weak radio signal
•
FM; Adjust the FM telescopic aerial
n o P r
indication
-
During programming radio preset stations, you have
keyed in a preset number that exceeds die maximum
preset number i.e. 40
*
Key in a preset number from 1-40
n a C d
indication
-
CD badly scratched or dirty
• Replace/ clean CD, see Maintenance
-
Laser lens steamed up
• Wait until lens has cleared
t P C d
indication
-
CD-FHW) is blank/not finalized
• Use a finalized CD-R(W)
d P t P
indication
-
CD contains non-audio files
• Press SEARCH h« or once or more to skip to a
CD audio track, instead of the data file
The CP skips tracks
-
CD damaged or dirty
• Replace or clean CD
-
SHUFFLE or PROGRAM is active
• Switch off SHUFFLE / PROGRAM
Poor cassette sound quality
-
Dust and dirt on the heads, etc.
• Clean deck parts, see Maintenance
-
Use of incompatible cassette types (METAL or
CHROME)
• Only use NORMAL (lEC I) for recording
Recording does not work
-
Cassette tat^s) may be broken
• Apply adhesive tape over the missing tab space
Remote control does not function properly (for
AZ1505 model only)____________ _______________
-
Batteries dead/ incorrectly inserted
•
Insert (fresh) batteries correctly
-
Distance/angle between the set too large
• Reduce the distance/ angle