Important safety instructions, Class ii equipment symbol – Philips AZ150517 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
V
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use thb af^>aratus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventila
tion openings. Install in accor
dance with the manufacturers
instructions.
8. Do not install near any heat
sources
such as radiators, heat regis
ters, stoves, or other apparatus (including
amplifiers) that produce heat
9. Do not defeat the
safety purpose
of
the polarized or
^AC Polarized
grounding-type plug.
A polarized plug has two blades with
one wider than the other A grounding
type plug has two blades and a third
grounding prong.The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet consult an electrician for
replacement of the obsolete outlet
10.
Protect the power cord
from
being walked on or pinched, particularly
at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11.Only use attachments/accessories
specified by the manufacturer
12. ,^9^ Use only with a cart,
stand,
tripod, bracket or table speci
fied by the manufacturer or
sold with the apparatus. When
a cart is used, use caution
when moving the cart/appara-
tus combination to avoid injury
from tip-over
13. Unplug this apparatus
during light
ning storms or when unused for long
periods of time.
14. Refer all servicing
to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way such as if the power-supply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
or when the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
15. Battery usa^ CAUTION
-To
prevent battery leakage which may
result in bodily injury or damage to the
unit
•
Install
all
batteries correctly, + and - as
marked on the unit
•
Do not mix batteries
(old
and
new
or
carbon
and
alkaline,
etc.).
•
Remove batteries when the unit is not
ubed for a long time.
EL 6475-E002:01/3
Class II equipment symbol
□
This symbol indicates that the unit has a double insulation system.