Re m – Philips MX2790B User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
F
eati
RE M
em
C
ontroes
(
contim
ed
)
!□
rAHi.i; riMN(;
'\7ou need to make sure the TV is
J. set to pick up either Cable TV
or Antenna signals. In other words,
the TV needs to know if you
connected a Cable TV signal or a
normal antenna to its ANTENNA
plug.
NOTE: If you went through First
Time Setup (in your Quick Use
Guide), this task has already been
completed for you.
<P
Select CABLE CHANNEL
TUNING control.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU ( M ) t b u t t o n s .
Then press the MENU button.
<|> Press the MENU AV buttons
to move the RED highlight. Press
the MENU button to select (u^) the
desired mode - For Example:
CABLE.
CABLE-
NORMAL-
If you DO have
Cable TV connected
to the TV. Channels
1-
125 available.
If you have an
Antenna connected
to the TV. Channels
2- 69 available.
<l>
Press the STATUS button to
clear the screen.
> FEATURE MENU
NORMAL ANT A
CABLE ANT B
NORMAL ANT B
Note: Both ANT(enna) A and ANT B inputs
on the rear of the TV can be set for the correct
connected signal (either an Antenna or Cable
TV source).