Philips FW555C37 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CONTENTS

General Information

.............................................

9

Safety Information

..................................................

9

Preparation

.....................................................

10- 11

Controls

................................................................

12- 13

Operating The System

.........................

14 -15

CD

...................................................................................

16- 18

Tuner

.........................................................................

18-19

Tape

............................................................................

20-21

Aux

..............................................................................................

21

Recording

............................................................

22- 23

Clock

.........................................................................................

24

Timer

..........................................................................

24-25

Sleep Timer

.....................................................................

25

Maintenance

................................................................

25

Specifications

..............................................................

26

Troubleshooting

.....................................................

27

GENERAL INFORMATION

General Information

The typep I ate (which contains the

serial number) is located at the rear
of the system.

• Recording is permissible if

copyright or other rights of third

parties are not infringed.

• This device complies with part 15 of

the Federal Communications
Commission (FCC) rules. Operation
is subjected to the following two
conditions:
- This device may not cause

harmful interference, and

- This device must accept any

interference received, including
interference that may cause
undesired operation.

Environmental Information

All unnecessary packaging has been

omitted. We have tried to make the

packaging easy to separate into three

materials: cardboard (box), polystyrene

foam (buffer) and polyethylene (bags,

protective foam sheet).

Your system consists of materials which

can be recycled and reused if disassembled

by a specialized company. Please observe

the local regulations regarding the disposal

of packaging materials, exhausted

batteries and old equipment.

,SJ

SAFETY INFORliiKTIQI» f i

Accessories

(Supplied)

- Remote control

- Batteries (two AA size) for remote

control

- AM loop antenna

- FM wire antenna

- AC power cord

Safety Information

• Before operating the system, check that

the operating voltage indicated on the

typeplate (or the voltage indication

beside the voltage selector) of your

system is identical with the voltage of

your local power supply. If not, please

consult your dealer. The typeplate is

located at the rear of your system.

• When the system is switched on, do not

move it around.

• Place the system on a solid base (e.g. a

cabinet).

• Place the system in a location with

adequate ventilation to prevent internal

heat build-up in your system.

• The system incorporates a built-in

safety feature that prevents over

heating.

• Do not expose the system to excessive

moisture, rain, sand or heat sources.

• Under no circumstances should you

repair the system yourself, as this will

invalidate the warrantyl

If the system is brought directly from a

cold to a warm location, or is placed in a

very damp room, moisture may

condense on the lens of the CD unit

inside the system. Should this occur, the

CD player will not operate normally.

Leave the power on for about one hour

with no disc in the system until normal

playback is possible.

Electrostatic discharge may cause

unexpected problems. See whether

these problems disappear if you unplug

the AC power cord and plug it in again

after a few seconds.

To disconnect the system from the

power supply completely, remove

the AC power plug from the wall

socket.

Advertising