Philips QC5550-40 - Manual (Page 11)

Replacing the Shaving Foil Head
ft If the shaving foil and cutters are worn or
damaged, do not continue using the Clipper.
Replace the shaving foil and cutters immediately.
ft It is recommended that you replace your
shaving foil and cutters once a year.
ft A worn or damaged shaving foil or cutters
should only be replaced with an original Philips
Norelco shaving foil, model QC5500, which is
available on the Philips Norelco website,
www.philips.com/support or call
I -800-243-3050 for assistance.
ft The foil is a precision part. Handle with care.
n Turn off the Clipper and disconnect it
from the electrical outlet.
B Press the release buttons on the shaving head
and remove the shaving foil from the shaving
head (fig. 24).
B
Remove the retaining frame from the old
shaving foil (fig. 27).
a
Place the retaining frame on the new shaving
foil (fig. 28).
B Remove the old shaving cutters (fig. 29).
□ Place the new cutters on the shaving head.
You will hear a ‘click’ (fig. 30).
B
Press the shaving foil back into the shaving
head (fig. 26).
This Clipper has no other user-serviceable parts.
For assistance call I -800-243-3050.
Assistance
For assistance, visit our website:
www.philips.com/support or
call toll free: 1-800-243-3050
Information is available 24 hours a day, 7 days a
week.