7illustration no. 7, Cleaning instructions – Cecilware WHIPPER User Manual

Page 7

Advertising
background image

7

Illustration No. 7

SLINGER DISC

INSERT

CHAMBER

MIXING

PRODUCT SHUTE

MIXING CHAMBER MOUNT

MIXER BLADE

EXTENSION

CHAMBER

MIXING

CHAMBER

MIXING

DEFLECTOR

STEAM

HOPPER ASS'Y

PRODUCT

SWITCH

HEATER

DRIP TRAY BRACKET

DRIP TRAY

GRILL

SWITCH

RINSE

TOP COVER

MIXING CHAMBER PLATE

MIXING CHAMBER SPACER

DRIP TRAY BRACKET

SEAL (GASKET)

HEATER

SWITCH

SWITCH

RINSE

HOPPER ASS'Y

PRODUCT GUIDE

EXTENDER

CHAMBER

DEFLECTOR

CHAMBER

WING NUT

CLEANING INSTRUCTIONS

GRILL

DRIP TRAY

MIXING

STEAM

MIXING

ICAP MINI B LD (with Lit Door)

MINI WHIPPER B (without Lit Door)

TOP COVER

CLEANING INSTRUCTIONS

NB04A

WHIPPER B (without Lit Door)

ICAP1 B LD (with Lit Door)

CLEANING INSTRUCTIONS

CLEANING INSTRUCTIONS

NA62C

OPTIONAL

DAILY:

1. Wipe exterior of dispenser with a soft damp cloth.

Deflector setup by pulling forward.

2. Disengage Product Hopper by lifting straight up,

while retaining in the upright position.

3. Remove Mixing Chamber by turning Counterclockwise

and pulling forward.

A. Remove Mixing Chamber Insert by pulling up.

B. Remove Mixing Chamber Extension by pulling down.

4. Remove Mixer Blade by pulling forward.

5. Wash Grill, Mixer Blade, Insert, Extension, and Mixing

Chamber with a mild detergent.

6. Wipe upper compartment with a damp cloth.

7. Replace all parts including Hopper.

8. Dry thoroughly before reloading with product.

DAILY:

1. Wipe exterior of dispenser with a soft damp cloth.

Deflector setup by pulling forward.

2. Wash Drip Tray with hot water.

3. Flush Mixing Chamber by depressing Rinse Button

approximately 10 seconds.

WEEKLY:

NOTE: IN VERY HIGH VOLUME LOCATIONS, THIS

PROCEDURE SHOULD BE DONE TWICE A WEEK.

1. Open Top Cover, Door Assembly, and remove Steam

Deflector setup by pulling forward.

2. Disengage Hopper by lifting straight up,

while retaining in the upright position.

3. Remove Mixing Chamber by unscrewing wing nuts.

4. Wash all components after removing.

5. Wipe upper compartment with a damp cloth.

6. Replace all parts including Hopper.

7. Dry thoroughly before reloading with product.

Advertising
This manual is related to the following products: