Perfect Aire PAHP12002 - Manual (Page 11)

FIG. 3 FIG. 4 FIG. 5
FIG. 7A FIG. 7B - Top View FIG. 7C - Bottom View
FIG. 6
10
C
B
B
A
A
B
A
B
A
A B
O
• Handle the air conditioner gently.
• Be sure your air conditioner cabinet does not fall out of the opening during installation or removal.
• The place where the power cord exits the air conditioner should be no more than 4 ft (122 cm) from a
grounded 3 prong outlet.
• Do not block the louvers on the front panel.
• Do not block the louvers on the outside of air conditioner.
• Do not lift, pull or remove any expanded polystyrene (foam) from inside of the air conditioner.
It is NOT packing material.
Note:
Attach Top Channel:
Attach the top channel and side curtains to the air conditioner cabinet
before placing the cabinet in the window. (FIG. 6)
1. Locate provided bag of screws.
2. Place the top channel on top of the air conditioner cabinet, lining up the three
holes in the top channel with the three holes on top of the air conditioner cabinet.
Attach Side Curtains:
1. Locate provided bag of screws.
2. Insert the right-hand curtain connector tab into the curtain housing channels on the air conditioner (FIG. 7A).
3. Insert the top and then bottom of the right-hand curtain housing in the top and bottom curtain channels on the
air conditioner (FIG. 7B, FIG. 7C).
4. Slide the curtain housing into the curtain guides as far as it can go.
5. Repeat the above steps for the left-hand curtain.
A. Curtain housing
B. Curtain top channel on
air conditioner
A. Curtain housing
B. Curtain bottom channel
A. Side curtain
INSTALLATION INSTRUCTIONS