phil&teds metoo - Manual (Page 7)

En
WARnInGS
Read the instructions carefully before use and
keep them for future reference. Your child’s
safety may be affected if you do not follow
these instructions.
Always secure child with the restraints. •
never leave the child unattended in this table •
mounted chair.
The table mounted chair is not suitable for chil-
•
dren who cannot sit unaided.
The table mounted chair shall not be used by •
children weighing more than 15kg/33lbs.
Check stability of table before and after seating
•
child.
Minimum thickness of support surface 18mm •
(approx 0.7 inches).
Maximum thickness of support surface 45mm
•
(approx 2 inches).
do not use tablecloths or other objects on the •
support surface which might interfere with the
proper functioning of the anchoring elements.
Keep the table structure and surface clean and
•
dry to prevent slipping.
We recommend that you routinely check the •
clamping devices and re-tighten them, we also
recommend checking the rubber support pads
regularly.
do not place ordinary chair under this hook-on •
chair or position this hook-on chair on counters
or tables that are near structures which could be
used by the child to push the hook-on chair off or
up from the table or counter.
do not use on glass topped tables, tables with •
loose table tops, table leaves, single pedestal
tables, card tables or camping tables.
do not use replacement parts other than those
•
approved by the manufacturer or distributor.
Keep coverings away from children to avoid suf-
•
focation.
discontinue use if hook-on chair is broken.
•
Contact manufacturer immediately for
replacement parts or service.
do not use without all tips (suction cups or other
•
locking/latching mechanisms) attached securely
to table surface.
discontinue use if child, when seated in hook-on
•
chair, is able to move the hook-on chair arms on
the table top.
do not allow other children to play near or walk •
under hook-on chair while in use.
Before removing child from hook-on chair, be
•
sure child’s legs are free from hook-on chair
supports.
do not use if rubber grips are missing.
•
Ensure the full surface of the grip is in contact •
with the table top. The full surface of the screw
clamp must also be in contact with the underside
of the table.
do not use with tables that do not allow the full
•
surface of clamps and grips to be in contact with
the table, such as bevelled edges and small
round tables.
Important: Before loading a child for the first time
familiarise yourself with all fittings and straps.
do not use tablecloths, place mats or other objects on the ‘table’
surface as these might interfere with the
effectiveness of the metoo’s clamps.
Only use on tables where both the upper and lower parts of the
clamps make full contact with the table surfaces.
The person in charge bears the responsibility for
attaching the metoo seat firmly to a safe and stable structure,
and securely fastening the child safety harness buckle.
The metoo seat is designed for children who are sitting up on
their own unaided, up to approx three years of age and recom-
mended for children up to 15kg/33lbs.
WARnInGS
European Safety Standard
En 1272:1998 states:
Read the instructions carefully before use and
keep them for future reference. Your child’s
safety may be affected if you do not follow
these instructions.
The table mounted chair is not suitable for chil- •
dren who cannot sit unaided.
Check that the table will not tip when the table
•
mounted chair, attached to it, is in use.
Minimum thickness of support surface 18mm
•
(approx 0.7 inches).