PiPO V97 HD - Manual (Page 6)

Karbonn All rights reserved
-6-
n
Power monitoring and charging the batteries
The battery charge symbol i on the status bar indicates the
charging status of the batteries.
If the power goes down to empty, the device shuts off
automatically. If power is empty, use the power adapter to charge the
device.
The charging time for the battery is approximately 6~8 hours.
Screen lock
If the device is not used for specified time or press the ‘Power’
button briefly, the screen will switch off and display lock is activated. By
pressing the ‘Power’ button briefly the screen will be reactivated. For
unlocking the screen press the ‘Lock’ button in the specified direction.
Connecting to the computer and data transfer
V97 HD is equipped with a High-Speed USB2.0 Interface. After
you connect the device to a computer, it appears in the status bar
display
.
Pull the status bar down and press ‘USB Connection’ to activate the
USB Memory. When using the device for data transfer,
you cannot access the Micro SD/TF Card from V97 HD!