Potter PFC-6075 User Manual
Page 57
5-51
PFC-6075 • 5403593 • Rev C • 2/13
The following series of messages display on the LCD:
Notes:
If the ethernet cable is connected to PC, you will see the
•
"Initializing IP" message prior to the "Obtaining IP"
message.
If your PC is connected directly to the panel, the
•
"Obtaining IP" message displays for approximately 45 seconds,
followed by the "Private IP" message (the "Private IP" message is not shown here).
Note: The number “10.0.5.27” shown above represents an example of a panel’s IP or identifier used for illustration
purposes only. The panel’s IP is unique to each computer / network. Write down the IP address; it is required to transfer
programming data between the panel and the computer.
3. The “IP configured” and “IP address” prompts alternatively display until configuration is completed.
Note: If ethernet connectivity is lost, the message “Ethernet Lost” displays on panel. This indicates that the ethernet cable
is disconnected at the panel or network (computer) port.
PFC-6075
Initializing IP
PFC-6075
IP Configured
PFC-6075
Obtaining IP
IP address
10.0.5.27