Pro Boat PRB2200 V.2 - Manual (Page 5)

5
Section 1: Installation of Receiver and Transmitter Batteries (cont.)
Re-install the battery holder back into the radio box and
properly seal the radio box with clear (3M) tape. Failure to
properly seal the radio box could result in damage to your
radio equipment.
Remove the transmitter from the box.
Remove the battery cover on the bottom of transmitter.
Note the proper polarity and insert 8 “AA” batteries into
the transmitter.
Turn on the radio to ensure the batteries have been
installed correctly.
Turn the radio off.
Re-attach the tuned pipe and coupler to the exhaust manifold.
Re-install the tuned pipe mount.
Transmitter Batteries
6A
6B
7
8A 8B
9A 9B
9C