Pro Boat PRB3050S - Manual (Page 5)

5
 1. Turn on the transmitter then the receiver
and check for correct operation. Move the
Steering wheel on the transmitter left and
right. The rudder should move relative to the
stick movement.
 2. With the propeller free from any objects,
give some throttle input to ensure that the
motor is working. If everything appears to
be functioning correctly, you are ready to
run your boat! If any of these functions are
reversed, change the respective reversing
switch position.
Note : If you are transporting the boat,
disconnect the battery from the speed controller
and then turn the radio off until you are ready to
run the boat. Once ready, simply turn the radio
on and plug the battery into the speed controller,
making sure that the throttle is in the neutral
position.Read the radio system instructions
(included with the boat) before operating.
Forward
Left
Left
 3. Connect the battery plug to the matching
connector on the electronic speed control.
 4. Replace the hatch.
Checking the Radio System