PS Engineering PMA8000SR Pilot’s Guide - Manual (Page 9)

202-880-0000 Page 9 R5 PMA8000-SR Pilot Guide
are located along the bottom row of buttons. Hold the “Function” button
while accessing the other SIRIUS functions.
Distribution of the SIRUIS Audio is determined by the installer, it can be
applied to the pilot and copilot, the passengers, or both, or controlled by external
switching.
On/off
To turn on the SIRIUS module, press and hold the Function ( “TEL” )
button, while pressing the ON/OFF (“SPR”) button. To turn the module
off, repeat the sequence. NOTE: The SIRIUS Module will be OFF when
power is initially applied to the audio panel.
Volume
Hold the function button (TEL), press and hold the “Mute” button to
decrease the SIRUIS radio volume.
Hold the function button press and hold the “AUX” button to in-
crease the SIRIUS radio volume.
When the volume controls are activated you will hear a tone. This will
allow you to hear the SIRIUS level, even if you are not receiving a sig-
nal.
Channel up/down
Hold the function (TEL) button, and briefly press the “Mute” button to
increase the SIRUIS radio channel. Hold the function button and briefly
press the AUX button to reduce the SIRIUS radio channel.
When the channel controls are activated you will hear the voice an-
nounce the channel. This will allow you to hear the SIRIUS channel se-
lected. If the channel selected is not available, you will hear, “Not Ac-
tive.”
SIRIUS Radio Controls