7equipment required but not supplied, License requirements, 7 equipment required but not supplied – PS Engineering PMA450 Installation Manual User Manual
Page 7: 8 license requirements
PS Engineering
PMA450 Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-450-0000
Page 1-4
Rev. 3, November 2014
PMA450 Installation Kit: 250-890-0000
Description
Quantity
Part
Number
Installation rack assembly
1
430-890-0040
Rack back plate
1
430-890-0050
44-pin connector kit
2
120-891-2045-
Backshell, connector
2
625-025-2465
Backshell Retainer
2
431-881-0100
4 40 X 7/16 screw w/nylon patch
4
475-440-0007
4 40 X 3/8 screw w/nylon patch
4
475-440-1038
4-40 x ¼” screw with lock washer
2
475-440-0001
Solder Lug
2
475-009-0001
Cable Clamp
1
625-001-0002
#6-32 x ½” Flat head Philips screw
6
475-632-0012
#6-32 Clip Nut
6
475-630-0002
1.7
EQUIPMENT REQUIRED BUT NOT SUPPLIED
a.
Circuit Breaker: 1 ea; 5 amp PULL TYPE REQUIRED for PMA450
b.
Isn’t this optional? You’re not required to have speaker are you? Speaker, 4
c.
Headphone Jacks (Stereo, as Required)
d.
Microphone Jacks (as Required)
e.
Headphones, 150
(Stereo), up to 6 as required
f.
Microphones, up to 6 as required
g.
Marker Antenna (75 MHz, VSWR <1:1.5, and appropriate for the airspeed) (-0100 Only)
h.
Interconnect Wiring
1.8
LICENSE REQUIREMENTS
None
PMA450 Bluetooth™ Radio approval:
FCC ID: QOQWT32AE
Industry Canada ID: 5123A-BGTWT32AE
CE EMC Directive 89/336/EEC as amended by Directives 92/31/EEC and 93/68/EEC