PS Engineering PMA6000M-S User Manual
Page 17
PS Engineering
PMA6000 Series Audio Selector Panel and Intercom System
Installation Manual
200-066-0006
Page 2-10
Rev. 6, March 2005
2.11 Final
Inspection.
Verify that the wiring is bundled away from all controls and no part of the installation interferes with air-
craft control operation. Move all controls through their full range while examining the installation to see
that no mechanical interference exists. Verify that the cables are secured to the aircraft structure in accor-
dance with good practices, with adequate strain relief. Ensure that there are no kinks or sharp bends in the
cables and coaxial cables. Verify that the cables are not exposed to any sharp edges or rough surfaces, and
that all contact points are protected from abrasion. Complete log book entry, FAA Form 337, weight and
balance computation and other documentation as required. Return completed warranty registration applica-
tion to PS Engineering