Dodge 2009 Dakota - Manual (Page 10)

speed conTrol
CRUiSE ON/OFF
• Press the ON/OFF switch to activate the Speed Control.
• CRUISE will appear in the instrument cluster to indicate the
Speed Control is on.
• Press the ON/OFF switch a second time to turn the system off.
SET
• With the Speed Control on, press and release the Set switch to set a
desired speed.
ACCEL/DECEL
• Press and hold the Resume/Accel switch to accelerate or press and
hold the Decel switch to decelerate the vehicle, release the switch to
save the new set speed.
• Once a speed is set, pressing the Resume/Accel switch once or decel
switch once will increase or decrease the set speed approximately
1 mph (2 km/h).
CANCEL
• Press the Cancel switch, or apply the brakes or clutch to cancel
the set speed and maintain the set speed memory.
• Press the ON/OFF switch to turn the system off and erase the set
speed memory.
RESUME
• To resume a previously selected set speed in memory, press the
Resume/Accel switch and release.
Push
on/oFF
Push
resume - accel
Push
Cancel
Push
Decel
Push
set
175476_09a_Dakota_102408.indd 11 4/24/09 1:45:37 PM