Dodge 2009 Dakota - Manual (Page 11)

Wipers
Pull lever for
high Beams
Push Washer
Turn signals/wiper/washer/high beaMs leVer
TURN SiGNALS/LANE CHANGE ASSiST
• Tap the lever up or down once and the turn signal (right or left) will
flash three times then automatically turn off.
WiPERS
intermittent, Low and High Operaton
• Rotate the end of the lever to the first detent position for one of five
intermittent settings, the second detent for low wiper operation and
the third detent for high wiper operation.
Washer Operation
• Push the end of the lever inward to the second detent and hold for as
long as spray is desired.
HiGH BEAMS
• Pull the lever toward you to activate the high beams.
• A high beam symbol will illuminate in the cluster to indicate the
high beam lights are on.
WinD BuFFeting
• Wind buffeting can be described as a helicopter-type percussion
sound. if buffeting occurs with the rear windows open, adjust the
front and rear windows together.
175476_09a_Dakota_102408.indd 12 4/24/09 1:45:43 PM