Power lumbar - if equipped, Heated seats - if equipped – Ram Trucks 2009 1500 - Owner Manual User Manual

Page 140

Advertising
background image

Power Lumbar — If Equipped

The lumbar controls are located on the outboard side of
the seat cushion. The lumbar support can be increased by
pressing the front of the switch and decreased by press-
ing the back of the switch.

Heated Seats — If Equipped

Both front seats and rear passenger seats can be equipped
with heaters. The switches for the front seats are located
in the instrument panel under the climate controls. The
switches for the rear passenger seats are located on the
back of the center console.

After turning the ignition ON, you can choose from High,
Low, or Off heat settings. Amber indicator lights in each
switch indicate the level of heat in use. Two indicator
lights will illuminate for High, one for Low, and none for
Off.

Press the switch once to select High-
level heating. Press the switch a sec-
ond time to select Low-level heating.
Press the switch a third time to shut
the heating elements Off.

Lumbar Control Switch

138

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising