Connecting the ipodĥ, Universal consumer interface (uci) 0.5 — if, Equipped – Ram Trucks 2010 3500 - Owner Manual User Manual

Page 269: Connecting the ipod

Advertising
background image

UNIVERSAL CONSUMER INTERFACE (UCI) 0.5 —
IF EQUIPPED

NOTE:

This section is for sales code RES and REQ/

REL/RET radios only with uconnect™. For sales code
RER, RBZ, REN, REP, REW, RB2 or REZ touch-screen
radio UCI feature, refer to the separate RER, REN, RBZ,
RB2 or REZ User’s Manual. UCI is available only if
equipped as an option with these radios.

This feature allows an iPod

௡ to be plugged into the

vehicle’s sound system through a 16–pin connector, using
the provided interface cable.

UCI supports Mini, 4G, Photo, Nano, 5G iPod

௡ and

iPhone

௡ devices. Some iPod௡ software versions may not

fully support the UCI features. Please visit Apple’s
website for software updates.

NOTE:

• If the radio has a USB port, connecting an iPod௡ to this

port does not play the media. For playing an iPod

௡,

use the separate 16–pin connector port (in the glove
compartment on some vehicles).

• Connecting an iPod௡ to the AUX port located in the

radio faceplate, plays media, but does not use the UCI
feature to control the connected device.

Connecting The iPod

Use the provided connection cable to connect an iPod

௡ to

the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPod

௡ is connected and synchronized to the vehicle’s UCI

system (iPod

௡ may take a few seconds to connect), the

iPod

௡ starts charging and is ready for use by pressing

radio switches, as described below.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

267

Advertising
This manual is related to the following products: