Rear lamp bar id marker (dual rear, Wheels) — if equipped – Ram Trucks 2010 3500 - Owner Manual User Manual
Page 559
Advertising
![background image](/manuals/709145/559/background.png)
Rear Lamp Bar ID Marker (Dual Rear Wheels) — If
Equipped
1. Loosen the two screws and the housing to gain access
to the bulb sockets.
2. Turn the socket
1
⁄
4
turn counterclockwise to access the
bulb.
3. Pull the bulb straight out from the socket.
4. Reverse the procedure for installation of the bulbs and
housing.
7
MAINTAINING YOUR VEHICLE
557
Advertising
This manual is related to the following products: