Enhanced seat belt use reminder system, Beltalert – Ram Trucks 2012 С/V - Owner Manual User Manual

Page 70

Advertising
background image

4. The AHR front soft foam and trim half should lock
into the back decorative plastic half.

NOTE:

• If you have difficulties or problems resetting the

Active Head Restraints, see an authorized dealer.

• For safety reasons, have the Active Head Restraints

checked by a qualified specialist at an authorized
dealer.

Enhanced Seat Belt Use Reminder System
(BeltAlert

)

BeltAlert

௡ is a feature intended to remind the driver and

front passenger (if equipped with front passenger
BeltAlert

௡) to fasten their seat belts. The feature is active

whenever the ignition is on. If the driver or front seat
passenger is unbelted, the Seat Belt Reminder Light will
turn on and remain on until both front seat belts are
fastened.

The BeltAlert

௡ warning sequence begins after the vehicle

speed is over 5 mph (8 km/h), by blinking the Seat Belt
Reminder Light and sounding an intermittent chime.
Once the sequence starts, it will continue for the entire
duration or until the respective seatbelts are fastened.
After the sequence completes, the Seat Belt Reminder

AHR In Reset Position

68

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising