Ram Trucks 2013 Chassis Cab - Owner Manual - Manual (Page 381)

These dual rear wheels should be tightened as follows:
1. Tighten the wheel nuts in the numbered sequence to a
snug fit.
2. Retighten the wheel nuts in the same sequence to the
torques listed in the table. Go through the sequence a
second time to verify that specific torque has been
achieved. Retighten to specifications at 100 miles
(160 km) and after 500 miles (800 km).
Tightening Pattern (8 Studs)
Tightening Pattern (10 Studs)
6
WHAT TO DO IN EMERGENCIES 379