Ram Trucks 2014 ProMaster Commercial - Uconnect 5.0/5.0N Manual - Manual (Page 103)

Settings
Press the Settings hard-key to display the following
options:
Display
• Brightness (this setting is not available when the display
mode is set to Automatic) - Select Brightness and press
the + or – buttons to adjust the display brightness with
the headlights on or off (the setting not corresponding
to the active headlight condition is greyed out).
• Display Mode - Press the Display Mode button to set
the display brightness according to Day, Night or Auto
condition. In Auto mode the display brightness is
aligned to that of the instrument panel.
• Language - Press the Language button to select one of
the languages available.
• Units - Press the Units button to select the correct unit
for Temperature (°C or °F), Distance (mi or km) and
Fuel Consumption. If the distance is in mi (miles),
miles per gallon (mpg) are set automatically. If the
distance is in km, km/l or l/100km can be selected.
• Voice Resp. Length - Press the relevant button to set the
detail level of the voice messages supplied by the
system and the suggestions displayed.
102 Uconnect® 5.0