Ram Trucks 2014 ProMaster Commercial - Uconnect 5.0/5.0N Manual - Manual (Page 92)

Using POIs to Plan a Route
When you plan a route, you can use a POI for the
destination or as a waypoint.
The following example shows how to plan a route to a
parking lot in a city:
1. Tap Drive to Drive to
2. Tap Point of Interest.
3. Tap POI in city.
NOTE: The last POI you viewed on your navigation
system is also shown in the menu.
4. Enter the name of the town or city and select it when
it is shown in the list.
5. Tap the arrow button to expand the list of POI
categories.
NOTE: If you already know the name of the POI you
want to use, you can tap Search by name to enter the
name and select this location.
6. Scroll down the list and tap Parking lot.
7. The parking lot closest to the city center is shown at
the top of the list.
8. The following list explains the distances shown next to
each POI. How the distance is measured varies de-
pending on how you initially searched for the POI:
• POI near you - Distance from your current location.
• POI in city - Distance from the city center.
• P OI near Home - Distance from your Home location.
• POI along route - Distance from your current location.
• POI near destination - Distance from your destination.
1
Uconnect® 5.0 91