Ram Trucks 2014 ProMaster Commercial - User Guide - Manual (Page 35)

Equalizer, Balance And Fade
1. Press the SETTING hard-key on the right side of the display.
2. Scroll down and touch the “Audio” soft-key to open the Audio menu.
3. The Audio Menu shows the following options for you to customize your audio
settings.
Equalizer
• Touch the “Equalizer” soft-key to adjust the Bass, Mid and Treble. Use the + or -
soft-key to adjust the equalizer to your desired settings.
Balance/Fade
• Touch the “Balance/Fade” soft-key to adjust the sound from the speakers. Use the
“arrow” soft-keys to adjust the sound level from the front and rear or right and left
side speakers. Touch the Center “C” soft-key to reset the balance and fade to the
factory setting.
Speed Adjusted Volume
• Touch the “Speed Adjusted Volume” soft-key to select between OFF, 1, 2 or 3.
This decreases the radio volume relative to a decrease in vehicle speed.
Loudness
• Touch the “Loudness” soft-key to select the Loudness feature. When this feature
is activated it improves sound quality at lower volumes.
Surround Sound
• Touch the “Surround Sound” soft-key, select On or Off followed by touching the
“back arrow” soft-key. When this feature is activated, it provides simulated surround
sound mode.
Radio Off Delay
• Touch the “Radio Off Delay” soft-key and select 0 – 20 minutes followed by
touching “Done” or the “back arrow” soft-key. When this feature is activated, the
radio remains on for the selected amount of time while the engine is off.
Auto-On Radio
• Touch the “Auto-On Radio” soft-key, select On, Off, or Recall Last followed by
touching “Done” or the “back arrow” soft-key. When this feature is activated, the
radio automatically turns on when the vehicle is in run or recalls whether it was on
or off at last ignition off.
ELECTRONICS
33