Sceptre E555BV-FMQR - Manual (Page 13)

- 13 -
www.SCEPTRE.com
SCEPTRE E55 HDTV User Manual
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to
both analog and digital channels. This connection uses coaxial RF
cable. For over-the airwave digital stations please check
http://www.antennaweb.org . This tuner DOES NOT support QAM.
For digital cable, you WILL need a cable box.
8. HDMI1-3 – HDMI connects to devices that use HDMI cable, such as
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video. HDMI 2 also doubles as the MHL connection for
cell phones. MHL is a protocol where the TV will display what your
cell phone displays. If your cell phone supports MHL you can
purchase a MHL cable from any electronic store and connect it to
HDMI 2 and also your cell phone. Make sure the TV’s source is
changed to HDMI 2 and turn on your cell phone. You should see an
image of your cell phone screen. HDMI 2 also supports ROKU™
streaming stick. Plug the ROKU stick to HDMI 2, and switch your
source to HDMI2. Afterwards use the purple colored buttons to
access ROKU functions.
9. HEADPHONE – This connection is for headphones to be attached to
the TV.
10. Analog Audio Out – This connection is for connecting to analog
audio receivers.
Please Note:
• This TV features a power saving function which will turn off the
TV automatically after 10 minutes of idling on a connection with
no signal. This feature is present on all connection.
• This TV does NOT support QAM under TV tuner.