Attaching or removing the stand – Sceptre E555BV-FMQR User Manual
Page 8
- 8 -
www.SCEPTRE.com
SCEPTRE E55 HDTV User Manual
Attaching or Removing the Stand
1.
To remove or attach the neck for mounting the TV, lay the TV flat on a table with the screen
facing downwards. Unscrew the 4 screws indicated in the picture and the neck will come off.
2.
A ttach the plastic ring to the bottom of the neck and the metal plate to cover up the
base. Make sure to match the 3 holes / metal pin on the metal plate to 3 holes / guard rail on
the bottom of the neck. Finally screw in the 5 thick threaded screws to secure the stand.
3.
To finalize your installation of the TV, please read the following:
1). If you are placing the TV on a stand, we would recommend you to use a TV safety
strap (not included) in order to minimize the possibility of the TV toppling over.
2). If you are mounting the TV on the wall
•
Make sure the wall is structurally safe for the weight of the TV
•
Make sure the wall mount kit is compatible with the TV
•
Read and follow all instructions provided by the wall mounting kit.
•
Securely install all screws and connections.