Sceptre X400BV-FHD - Manual (Page 19)

- 19 -
www.SCEPTRE.com
SCEPTRE X40 HDTV User Manual
Connecting a Digital Audio Receiver Connecting a Digital Audio Receiver Connecting a Digital Audio Receiver Connecting a Digital Audio Receiver with with with with Optical Optical Optical Optical SPDIF… SPDIF… SPDIF… SPDIF…
1. Make sure the power of X40 LCD HDTV and your receiver is turned off.
2. Obtain an optical SPDIF cable, connect it to your receiver’s optical
SPDIF digital input and the optical SPDIF connection on the LINE OUT
port on the back of the X40 LCD HDTV.
3. Turn on the X40 LCD HDTV and your receiver.
Please Note :
• If you want pure digital stream for your receiver to decode, you
must also configure the TV’s OSD Sound->Digital Audio Out
function. Make sure the option is on Bit Stream.
• If your receiver is making static noises when receiving Bit
Stream, you must use the PCM option instead.
• Please reference the receiver’s manual as well, to make sure
the receiver is configured to receive signals correctly from the
TV.