Identifying front and rear panel, Front view, Rear view mounting pattern – Sceptre E195BV-HD User Manual
Page 10
- 10 -
www.SCEPTRE.com
SCEPTRE E195 HDTV User Manual
Identifying Front and Rear Panel
Front View
INDICATOR LIGHT
– The light is red when power is plugged in but the TV is not turned on. The
light turns blue when the TV is turned on. Because of the LED in the panel, the E195 LED backlit
LCD TV might take 10
– 12 seconds to power on.
REMOTE SENSOR
– The remote sensor receives all the commands from the remote control.
Rear View Mounting Pattern
Mounting Specification : 100mm x 100mm using screw size M4. Length of screw should not exceed
10mm. Please Note : The 10mm length of screw refers to how deep the screw can go inside the
mounting holes. When you’re buying screws, you should add the original 10mm to the thickness of
your mounting plate in order to get the total screw length. The 2 screws in the package are for
securing the TV stand only. If you are mounting the TV please consult a qualified installer for
further instructions on bracket support and wall support.