Connecting wii™ with composite – Sceptre E195BV-HD User Manual
Page 18
- 18 -
www.SCEPTRE.com
SCEPTRE E195 HDTV User Manual
Connecting Wii™ with Composite…
1.
Make sure the power of E195 LED backlit LCD HDTV and your
Wii™ is
turned off.
2.
Obtain a Yellow Video Cable. Connect the Yellow Video connector to both
your
Wii™ and AV’s Yellow Video connector port on the back side of your
E195 LED backlit LCD HDTV.
3.
Obtain a RCA Audio Cable. Connect the white color connector to both your
Wii™ and AV’s white connector port on the back side of your E195 LED
backlit LCD HDTV.
4.
Connect the red color connector to both your
Wii™ and AV’s red connector
port on the back side of your E195 LED backlit LCD HDTV.
5.
Turn on the E195 LED backlit LCD HDTV and your
Wii™.
6.
Use the remote control’s source button or the source button on the TV to
switch to AV.
Please Note :
Make sure to read your Wii™ installation guide for further
information.
If you are using this current connection then the YPbPr
connection will not have audio because the red and white
audio connection is shared with this port.