Sceptre X325BV-FMDR - Manual (Page 8)

- 8 -
www.SCEPTRE.com
SCEPTRE X325BV-FMDR User Manual
Attaching or Removing the Stand
1. Place the display unit flat on a table. Afterwards attach the plastic base
onto the neck by form fitting the circular hole. Remember the plastic base
should have more area facing the front of the neck. Fit the metal plate
onto the bottom of the base by matching the 3 holes. Screw in the 4 thick
threaded screws to secure the metal plate to the plastic base. The
stand installation is now complete.
2. To install or remove the stand, screw in or remove the 4 screws indicated
in the picture and the stand will come off.
3. To finalize your installation of the TV, please read the following
A.
If you are placing the TV on a stand, we would recommend you to use a TV
safety strap (not included) in order to minimize the possibility of the TV
toppling over.
B. If you are mounting the TV on the wall

Make sure the wall is structurally safe for the weight of the TV

Make sure the wall mount kit is compatible with the TV

Read and follow all instructions provided by the wall mounting kit.

Securely install all screws and connections