If you want the best connection with hdmi – Sceptre X42BV-FULLHD User Manual
Page 34
SCEPTRE X42 HDTV User Manual
- 34 -
www.SCEPTRE.com
Connecting Your Satellite or
Cable Set-top box to the TV
If You Want the Best Connection with HDMI…
1.
Make sure the power of X42 LCD HDTV and your set-top box is turned off.
2.
Connect a HDMI cable to the HDMI output of your set-top box and the other end to the
HDMI port off the back of your X42 LCD HDTV.
3.
Turn on the X42 LCD HDTV and your set-top box.
4.
Use the remote control’s source button or the source button on the right side of the TV to
switch to HDMI 1.
Please Note :
•
Please reference the set-top box’s manual, to make sure the set-top box is
configured to output correctly to the TV.
•
If HDMI 1 is already occupied, please use HDMI 2 as your connection port and
switch source to HDMI 2.
•
This TV does not decode Bitstream digital audio, therefore you’ll need to make
sure your DVD is setup for PCM digital audio through HDMI.
•
Sceptre’s X42 LCD HDTV supports SONY’s universal remote code. Please
look up SONY’s codes in your universal remote’s hand book.
•
This TV will turn off automatically if there’s no signal present for more than 15
minutes.